Pokémon card centering checker
Photograph the front and back. Preslab measures the borders and shows how high the centering lets the card grade at PSA, TAG, BGS, CGC and ACE.
On this page
What it measures
On the front, the printed border around the art: the yellow border on most cards, the silver border on many full-arts. On the back, the blue border around the swirl. Each side is read left against right and top against bottom, and drawn on your photo so you can see where the lines landed.
The limits for a 10
| Company | Front | Back |
|---|---|---|
| PSA | 55/45 | 75/25 |
| TAG | 55/45 in TAG's reading | 65/35 |
| BGS | 50/50 | 55/45 |
For BGS, the result is the centering subgrade Beckett's table gives.
Taking the photo
- Out of the sleeve, flat on a dark, plain, matte surface. A yellow border on a light table has no edge to find.
- Phone straight above the card. The camera guide has a level, and lights the shutter when the phone is flat.
- No flash. Daylight, or two lamps from the sides, so the holo doesn't flare.
- In a toploader? Centering is still read through it. A magnetic case is not supported.
A photo that breaks a rule is turned away with the reason, so you can retake it, rather than being measured badly.
Pokémon cards and their backs
Every English Pokémon card shares the same back: the swirl inside a blue border. That makes the back one of the easiest places to see centering. Lay a few cards side by side and an off-center back jumps out, with a fat blue border on one side and a thin one opposite.
It also means the back is worth checking on every card, not just the chase cards. PSA allows 75/25 on the back for a 10, which most cards clear, but TAG asks for about 65/35 and Beckett more than that. Front vs back centering compares them.
Full-arts and special arts
Many full-art Pokémon cards still have a thin border around the art, and Preslab reads that border like any other. A card whose art runs right to the edge has no border to measure; there, Preslab asks you to place the lines yourself on the photo, rather than guessing.
Before you grade a Pokémon card
- Check the back edges under a bright light: whitening on the blue back shows up clearly.
- Tilt holo and foil cards under a lamp to look for scratches, which a straight-on photo hides.
- Measure the centering on both sides, then decide which company's limits suit the card.
How to check a card before grading goes through the whole routine.
What it doesn't do
It measures centering only. It gives you zoomed crops of the four corners to look at yourself, and it doesn't assess the surface. A result reads "up to": the most the centering allows, never a predicted grade.
Photograph the front and back. Preslab measures the centering and shows how high PSA, TAG, BGS, CGC and ACE let it grade. Free, and centering only.