How to photograph a card for centering

A good photo is most of the measurement. These are the rules Preslab checks your photo against.

On this page
  1. 1. Straight on
  2. 2. A dark, plain background
  3. 3. Fill the frame
  4. 4. Even light
  5. 5. Out of the sleeve
  6. 6. Front and back, each in focus
  7. If a photo breaks a rule

1. Straight on

Lay the card flat on a table and hold the phone directly above it. A tilted phone makes one side of the card look wider than the other, and that moves the ratio. The camera guide has a level, and lights the shutter when the phone is flat.

2. A dark, plain background

Use a matte surface that shows on all four sides of the card. A yellow border on a light table has no edge to find, and a patterned or glossy surface gives the measurement false edges.

3. Fill the frame

The closer the card, the finer the read. A border is a few millimetres wide, so a card that fills a third of the photo leaves little to measure.

4. Even light

Daylight, or two lamps from the sides. No flash: it puts a bright patch on holo and glossy borders, and a patch can hide the line where the border ends.

5. Out of the sleeve

A bare card is best. A card in a toploader still gets its centering read. A magnetic case does not work, and a card in a clear sleeve on a coloured mat can be read as the sleeve.

6. Front and back, each in focus

Take one photo of each side, as JPEG or PNG. The back is measured separately, and graders ask different things of it, so a clean front says nothing about a back.

If a photo breaks a rule

Preslab turns it away with the reason, so you can retake it, rather than measuring it badly. A reading near a limit is worth a second photo: take it again and see whether the lines land in the same place.

Preslab measures centering only. It gives you zoomed crops of the corners to look at yourself and does not assess the surface.

Check a card

Photograph the front and back. Preslab measures the centering and shows how high PSA, TAG, BGS, CGC and ACE let it grade. Free, and centering only.